Cisco Network Proposal (Parts 1-3)

Overview
–

Cisco Network Proposal (Parts 1-3).Your proposal will be submitted in three major parts:
·    Springfield Device and STP Configurations (i.e., Part 1)

·    Worchester Subnetting Configurations and Boston Site Protocol, Route Summarization, and Topology Improvement (i.e., Part 2)

·    Sacramento Site VLAN, Routing on a Stick(ROS) and DHCP Implementation, Los Angeles Site Management Technologies, xACME WAN – WAN Implementation and Security Communications (i.e., Part 3)
The details for each of these Part (i.e., Part 1, 2, and 3) can be found below. Each of these parts will be submitted to the LEO Assignments folders and TurnItIn. Each of these parts should be submitted independently of the other parts. That is, only submit Part 1 to the LEO – Assignments – Cisco Network Proposal Part 1 submission folder. Only submit Part 2 to the LEO – Assignments – Cisco Network Proposal Part 2 submission folder. And, only submit Part 3 to the LEO – Assignments – Cisco Network Proposal Part 3 submission folder.

Cisco Network Proposal (Parts 1-3)

Along with the challenges presented in this document, you will be provided an overall site topology to work from, as well as specific device configurations (where applicable) to make your recommendations.
Suggested solutions should be comprehensive and justified in approach. Configurations of technologies should be written out to help guide the systems administrators with implementation. In some cases, you may find it necessary to implement additional cabling, which can be done by adding to the supplied topology. Any adjustments to the sites’ topology that you find necessary should be documented and supplied with your submission.
Your document will be divided up by site and solutions per site. Each area is unique in requirements but collectively will demonstrate your understanding of network routing and switching technologies. Each scenario will provide you with suggested sections within TestOut (LabSim) to use as a guide in your analysis and recommendations.

Cisco Network Proposal (Parts 1-3)

To learn how you will be assessed on this assignment, take a moment to review the rubric. The final deliverable should adhere to the following criteria:
·    Use this

Cisco Network Proposal (Parts 1-3)

Cisco Network Proposal (Parts 1-3)

template as a guide while creating your Cisco Network Proposal (Parts 1-3).
·    Include at least two scholarly references in each of the three submissions. Thus, a total of six scholarly references will be included in total. Students may find scholarly sources by visiting UMUC’s library and online sources. Students will also include other credible sources as appropriate.
·    Use IEEE citation style. We do not use APA or MLA-style citations. Students should contact UMUC’s Effective Writing Center for assistance.
·    Use proper terminology and expand acronyms in each paragraph they are used. For example, the first time in a paragraph an acronym is used it should be expanded (e.g., University of Maryland University College (UMUC). Thereafter, and as long as you are in the same paragraph, the acronym (e.g., UMUC) can be used. When starting a new paragraph, the rule begins anew.
·    The use of figures and diagrams is encouraged. Students will properly cite the figures and diagrams according to the IEEE citation style.
·    Before submitting each part to the appropriate folder in LEO – Assignments, students will upload to TurnItIn. Students should review the LEO – Announcements for specific instructions or contact the Professor.

Existing VLANs

Cisco Network Proposal (Parts 1-3)

–
Remote locations vary in terms of size and requirements. Some implementations will require current site router/switch-running configurations, which will be provided. All sites will use the following four VLANs, but you will need to configure only what is asked per site (some assumptions will be made).
·    Existing VLANs, per xACME:
o    Faculty VLAN
§    used by faculty on-site for all office locations (non-instructional communications)
§    total devices per site will vary
o    Administrative VLAN
§    used by staff on-site for business administrative communications
§    total devices per site will vary
o    Academic VLAN
§    used by faculty and students for classroom labs and instructional communications
§    total devices per site will vary
o    Server VLAN

Cisco Network Proposal (Parts 1-3)

§    used by IT staff for all technology/management communications
§    total devices per site will vary
The types of devices per site will be the same; however, the number of deployed devices may vary (all documented in the xAcme educational topology).
Routers Per Site:

Cisco 2800 Series Integrated Services
Interfaces Ports Available    4 Fast Ethernet Interfaces
(Per Router)    2 Serial Interfaces
(Per Router)
fa0/0    s0/0/0
fa0/1    s0/0/1
fa1/0
fa1/1
Switches Per Site:

Cisco Catalyst 6500 Series
Ports Available    96 Total Gigabit Ethernet
Ports Per Switch
Module 1 = gi0/1 – gi0/24
Module 2 = gi1/1 – gi1/24
Module 3 = gi2/1 – gi2/24
Module 4 = gi3/1 – gi3/24
Note: Device type will not impact your configuration commands and implementation of ALL required technologies will use Cisco IOS commands/concepts learned in our TestOut lecture(s). Standard switchports will be configured and used as trunk OR access ports, and DCE ends should be noted when configuring serial ports per router.
Click here to download the configuration file for all of the devices. Note: one of the files in the zip file is a PacketTracer file. You can open it using the Packet Tracer program that you can download from here. The use of Packet Tracer is optional.

Springfield Site Device and STP Configurations (Focus on the Springfield Site Only)
+

Worchester Site Device and STP Configurations (Focus on the Worchester Site Only)
+

Boston Site Routing Protocol, Route Summarization and Topology Improvements (Focus on the Boston Site Only)
+

Sacramento Site VLAN, Routing on a Stick (ROS) and DHCP Implementation (Focus on the Sacramento Site Only)
–
Required Implementation: VLANs, ROS, and DHCP implementation
·    VLANs: Implement the VLAN database on the Sacramento site switches. Explain the assignment of switchport modes and how to implement each. Demonstrate how to implement port security on the switchports to allow only two MAC addresses per port and shutdowns for violations. Additionally, consider proper security management of any unused ports.
o    Provide the VLAN IDs, ports with matching switchport modes, and sample configuration of port security and port management steps.
·    ROS: The site will be treated as a routing on a stick (ROS) topology. Provide a sample configuration for Sacramento fa0/0 interface to support the multiple VLANs and inter-VLAN routing.
o    To simplify configuration, please use the following addressing:
§    faculty VLAN: 10.50.0.0 /26
§    administrative VLAN: 10.50.0.64 /26
§    instructional VLAN: 10.50.0.128 /26
§    server VLAN: 10.50.0.192 /26
·    DHCP: The site will need a solution to manage the deployment of IP addresses. Briefly explain the purpose of DHCP and provide implementation of the DHCP configuration for the VLANs. Be sure to include the pool name, exclude the last 10 addresses of each subnet range and configure the gateway, subnet mask, and DNS address (Sacramento fa0/0 address).
·    Please refer to the following configurations:
o    SacramentoSw1
o    SacramentoSw2
o    SacramentoSw3
o    SacramentoRouter

Cisco Network Proposal (Parts 1-3)

Los Angeles Site Management Technologies (Focus on the Los Angeles Site Only)
–
Required Implementation: Device configuration remote storage, remote management of switches, ACL implementation, and an NTP solution.
·    Remote IOS Storage: The site will require remote storage of the devices’ configurations. Server details are provided per your topology. You will determine the protocol to use and demonstrate how to implement the solution.
·    Remote Management of Switches: All devices will be configured to allow for remote management. You will be required to implement this solution on the switches found on the site.
·    ACL Implementation: In order to restrict and protect access to the devices, the only VLAN allowed to communicate remotely with the devices should belong to the server VLAN. Determine the type of ACL to implement and the placement of the list, and implement the solution on the site router.
·    Network Time Protocol: Implement an NTP solution on the devices found within this topology to ensure clock synchronization is accomplished. The purpose would be for accurate logging records and authentication protocols. Server details are provided per your topology.
·    Please refer to the following configurations:
o    LosAngelesSw1
o    LosAngelesSw2
o    LosAngelesSw3
o    LosAngelesRouter

xACME WAN – WAN Implementation and Secure Communications (Focus on All Site Entry Point Routers)
–
Required Implementation: WAN Implementation, device authentication, and topology suggestions.
·    WAN Implementation: Current WAN links are serial-based and connected over leased lines that are using the Cisco default protocol for layer 2 connectivity. Authentication is not present at this time, but the added security would be preferred. Research the available WAN protocols and suggest a solution to provide authentication between devices. Implement basic routing protocol authentication. Provide a sample implementation over serial links for your systems administrator to follow. Included in this task are device configurations for the current implementation.
·    Topology: Currently, the Los Angeles and Boston sites are connected across leased lines, and each remains as the entry point to its respective regional locations. There is growing concern over the amount of traffic both devices are handling. Review the xAMCE educational topology and make recommendations to provide some redundancy among sites, as well as to alleviate some of the bandwidth requirements placed on both devices. This may require additional lines to be leased. With your suggested improvements, update the topology as you see fit.
Note: Additional addressing is available if needed. Simply create the additional ranges from the provided available xACME public address range, 165.128.63.0 /26.
·    Please refer to the following configurations:
o    BostonSiteRouter1
o    WorchesterRouter
o    SpringfieldRouter
o    SacramentoRouter
o    LosAngelesRouter

Cisco Network Proposal (Parts 1-3)

Order 100% Plagiarism Free Essay Now